Wood Filler

Overview

What is a Wood Filler?

Wood Filler is a ready-to-use paste that fills surface imperfections before staining, sealing and top coating. It bonds strongly to the substrate, sands flush without tearing, and is available in tinted shades so repairs disappear into the final finish.

  • Fills dents, nail holes, joints, cracks and open grain
  • Works on solid wood, plywood, MDF and veneer
  • Sands easily to a smooth, feather-edged repair
  • Compatible with wood stains, sealers and clear topcoats
Fast Drying

Fast Drying

Sets quickly so sanding and sealing can continue without long delays.
Prepare the Surface

Easy Sanding

Sands to a smooth, feather-edged surface that blends into the surrounding wood.
Uncompromising Quality

Strong Adhesion

Bonds firmly to solid wood, plywood, MDF and veneer edges.
Build the Topcoat

No Shrinkage

Fills dents, nail holes and open grain without sinking back or cracking.
Wood Filler
Wood Filler Range
Catalogue

Wood Filler Range

  • Wallnut/Teak/ White
Premium Wood Filler

Where Wood Filler Is Used

Wooden Furniture

Residential Furniture

Sofas frames, beds, wardrobes and tables — filling joints, nail holes and grain before the final finish.

Architectural Woodwork

Commercial Interiors

Office furniture, counters and partitions where large surfaces need a uniform, defect-free base.

Commercial Interiors

Doors & Paneling

Flush doors, decorative panels and mouldings that need crisp edges and smooth faces.

Application

How to Apply Wood Filler

Four simple steps for a smooth, topcoat-ready wood surface.

Prepare the Surface

Prepare the Surface

01

Sand the bare wood along the grain, remove dust, grease and loose fibres. The surface must be dry before filling.
Build the Topcoat

Apply Wood Filler

02

Press the filler into dents, nail holes, joints and open grain with a putty knife. Overfill slightly for sanding.
Fast Drying

Let it Dry

03

Allow the filler to dry completely. Deeper fills may need a second thin layer rather than one thick coat.
Cure & Maintain

Sand & Finish

04

Sand flush with 180–220 grit, dust off, then apply sanding sealer and the chosen clear or pigmented topcoat.
FAQs

Your Questions, Answered

What is Wood Filler used for?

Wood Filler is a smooth, fast-drying paste used to level dents, nail holes, joints, cracks and open grain on wooden surfaces before applying a sealer or topcoat. It ensures the finish lays down flat and even.

How is Wood Filler different from NC Putty?

Both products fill surface defects, but Wood Filler is a general-purpose paste filler ideal for solid wood and open grain. NC Putty is nitrocellulose based, dries within minutes and is optimised for fast furniture production under NC, PU and melamine systems.

Which surfaces can Wood Filler be applied on?

It can be used on solid wood, plywood, MDF, particle board and veneer. The surface should be clean, dry and free of oil, wax or loose dust.

Can Wood Filler be stained or topcoated?

Yes. Once sanded flush, it accepts stains, sealers and clear or pigmented topcoats. Tinted shades like Walnut and Teak help the repair blend with the surrounding wood.