NC Paint (Dico)

Overview

What is NC Paint (Dico)?

NC Paint (Dico) is a fast-drying, nitrocellulose-based pigmented coating designed for wood finishing. It sprays to a smooth, even film, hides the substrate completely and can be sanded, recoated or buffed within a short working cycle — making it a mainstay of furniture workshops and interior finishing.

  • Fast-drying nitrocellulose formulation for rapid production cycles
  • Works on solid wood, plywood, MDF and veneer substrates
  • Smooth flow and excellent levelling for a uniform film
  • Available in a wide range of solid shades and gloss levels
Fast Drying

Fast Drying

Dries within minutes so sanding and recoating can continue without long delays.
Prepare the Surface

Smooth Flow

Levels beautifully on application, giving an even, defect-free coloured film.
Uncompromising Quality

Strong Adhesion

Bonds firmly to prepared wood, MDF, veneer and correctly primed surfaces.
Six Classic Shades

Rich Colour Depth

High pigment loading delivers deep, consistent shades with excellent hiding power.
nc paint
nc paint range
Catalogue

NC Paint (Dico) Range

  • NC PAINT-WHITE/G.YELLOW/ CREAM
  • NC PAINT-MAROON/PO RED/GREY
  • NC PAINT-NC BROWN/REDOXIDE/ BLACK
  • M.BROWN/D.BROWN/
  • NC PAINT-ALUMINIUM
  • LPS WHITE
  • LPS GREY
Premium NC Putty

Where NC Paint (Dico) Is Used

Wooden Furniture

Residential Furniture

Beds, wardrobes, tables and chairs — rich coloured finishes with a smooth touch and quick turnaround.

Kitchens & Cabinetry

Kitchens & Cabinetry

Modular kitchen shutters and cabinets where a clean, uniform pigmented finish is required.

Architectural Woodwork

Doors & Panels

Flush doors, decorative panels and mouldings that need crisp, even colour in gloss or matt.

Application

How to Apply NC Paint (Dico)

Four simple steps for a smooth, richly coloured wood finish.

Prepare the Surface

01

Sand the wood along the grain, fill defects with NC putty or wood filler, and remove all dust and grease. The surface must be clean and dry.
Build the Topcoat

Apply Sealer

02

Apply one or two coats of NC sanding sealer by spray, sand smooth with 220–320 grit between coats, and dust off thoroughly.
Pre-Paint Demo

Apply NC Paint (Dico)

03

Thin to spraying viscosity with the recommended NC thinner and apply two even coats, allowing each coat to flash off fully.
Cure & Maintain

Finish & Polish

04

Once fully dry, the film can be denibbed and buffed for a higher gloss, or left as-is for a satin or matt effect.
NC Paint (Dico) FAQ
FAQs

Your Questions, Answered

What is NC Paint (Dico) used for?

NC Paint (Dico) is a nitrocellulose-based pigmented paint used to give wooden furniture, doors, panels and interior woodwork a rich, opaque coloured finish in gloss, satin or matt. It is popular in furniture production because it dries very fast.

How is NC Paint different from PU paint?

NC Paint dries within minutes by solvent evaporation and is easy to repair and recoat, making it ideal for fast production. PU paint is a two-pack system that cures chemically, giving higher chemical and scratch resistance but longer drying times and a 4:1 mixing ratio.

Which surfaces can NC Paint (Dico) be applied on?

It can be applied on solid wood, plywood, MDF, particle board and veneer over a suitable sanding sealer. Surfaces should be properly filled, sanded and free of dust, oil and wax.

Can NC Paint be tinted to custom shades?

Yes. The Dico range covers popular furniture shades and can be tinted to match specific requirements while maintaining good hiding power and shade consistency.